 |
Danfoss "Danfoss Hydrostatic Steering Unit, 6 Cu. In. Disp. 100 Cu. Cm., Model# 150-0027"
"Used in vehicles where driver controls high steering forces reliably, comfortably and with maximum safety. Consists of rotary valve and meter and open center non-reactive ports. OSPB steering unit.Displacement Cu. In.: 6.0Displacement Cu. cm.: 100"
click for details... |
|
 |
Dynamic "Dynamic Low Speed, High Torque Hydraulic Motor — 15.8 GPM, 2430 PSI"
"For light- and medium-duty applications. Replacement for Charlynn H, White HS and Ross TRW MG series. Maximum inlet pressure is 2500 PSI and maximum back pressure is 1000 PSI. Fully reversible. 4-bolt mount. 1in. x 1 3/4in. shaft has 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. 1-year limited warranty.Maximum Displacement (cu. in.): 9.5Maximum GPM: 15.8Maximum RPM: 376Maximum PSI: 2430Maximum Torque (in. lbs.): 32751-year limited warranty"
click for details... |
|
 |
Haldex "Haldex 1 HP 115/208–230 Volt AC Hydraulic Power Unit — Basic, Model# 1530036"
Mounts vertically or horizontally. 60 Hz TEFC motor turns at 3450 RPM. .097 displacement pump and 1.5 gallon reservoir. Relief valve set at 2000 PSI. 1.25 GPM with check valve to prevent back flow. U.S.A.Power Unit: Basic (no valving)
click for details... |
|
 |
Haldex "Haldex 12 Volt DC Power Unit — Manual Operation, Double Acting, Model# 1510038"
Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 1/4in.-18 SAE ports. Items 1076 and 1077 are for double acting cyinders; others are for single acting cylinders. U.S.A.Operation: Manual; 3-Position ValveGPM at 1600 PSI: 2.0Reservoir: 3 qt.
click for details... |
|
 |
Haldex "Haldex 12 Volt DC Power Unit — Solenoid Operation, Single Acting, Model# 1261096"
Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 9/16in.-18 SAE ports. U.S.A.Operation: Solenoid w/Remote Cord SetGPM at 1600 PSI: 1.4Reservoir: 2.5 gal.
click for details... |
|
 |
Haldex "Haldex 12 Volt DC Power Unit — Solenoid Operation, Single-Acting, Model# 1261014"
Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Check and relief valve. 1/4in.-18 SAE ports. Items 1076 and 1077 are for double acting cyinders; others are for single acting cylinders. U.S.A.Operation: Solenoid w/Remote Cord SetGPM at 1600 PSI: 1.4Reservoir: 3 qt.
click for details... |
|
 |
Haldex "Haldex 12 Volt DC Power Unit, Single-Acting, Model# 1261009"
Use in applications where control valves are mounted externally away from power units. Flow and pressure to manifolds allow usage in many applications. Return port for returning oil back to tank. Basic power unit comes with check and adjustable relief valve. Can be used with single-acting cylinders. Can also be used with double-acting cylinders when plumbed correctly with the control valve. U.S.A.Operation: No Valving1.4 GPM @ 1600 PSIReservoir: 3 quarts9/16in.-18 SAE ports
click for details... |
|
 |
Haldex "Haldex AC Hydraulic Power System — Self-Contained, 2 HP, 115/230V AC, Model# 1400028"
"Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU® bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface.Pump GPM: 1.5Motor HP: 2Volts-AC: 115/230Reservoir: 5 Gallons1 PhaseOverall dimensions: 12 5/8in.L X 12in.W X 26 1/2in.H"
click for details... |
|
 |
Haldex "Haldex AC Hydraulic Power System — Self-Contained, 2 HP, 230/460V AC, Model# 1400029"
"Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU® bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface.Pump GPM: 2Motor HP: 2Volts-AC: 230/460Reservoir: 12 in. L x 12 in. W x 14 in. H approx. 8.5 Gallons3 Phase"
click for details... |
|
 |
Haldex "Haldex High Pressure Hydraulic Gear Pump — .065 Cu. In., Model# 1002962"
"Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A.Cubic Inch Size: .065Flow at 1800 RPM: 0.5Flow at 3600 RPM: 1.0Maximum PSI Cont.: 3000Maximum PSI Intmt.: 4000O-Ring Port Size, SAE: 9/16in.-18"
click for details... |
|
 |
Haldex "Haldex High Pressure Hydraulic Gear Pump — .194 Cu. In., Model# 1002965"
"Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A.Cubic Inch Size: .194Flow at 1800 RPM: 1.5Flow at 3600 RPM: 3.0Maximum PSI Cont.: 3000Maximum PSI Intmt.: 4000O-Ring Port Size, SAE: 3/4in.-16"
click for details... |
|
 |
Haldex "Haldex High Pressure Hydraulic Gear Pump — .517 Cu. In., Model# 1002968"
"Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A.Cubic Inch Size: .517Flow at 1800 RPM: 4.0Flow at 3600 RPM: 8.0Maximum PSI Cont.: 1200Maximum PSI Intmt.:2000O-Ring Port Size, SAE: 7/8in.-14"
click for details... |
|
 |
Haldex "Haldex Hydraulic Pump — 11 GPM, 2-Stage, Model# 1001689"
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A.GPM: 11Shaft: 1/2in.Inlet: 3/4in.Outlet: 1/2in. NPTDimensions: 5.5in.L x 3in.H x 4in.WMinimum HP: 5RPM Requirement: 3600For use with open center hydraulic systems only1st Stage: 11 GPM@650 PSI2nd Stage: 2.9 GPM@2500 PSIMaximum Pressure: 3000 PSIBolt Circle: 2.83in.4 Bolt Holes Spaced 2in. on CenterBolt Hole Diameter: .344in.Rotation: Clockwise
click for details... |
|
 |
Haldex "Haldex Hydraulic Pump — 13.6 GPM, 2-Stage, Model# 1001506"
"The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A.GPM: 13.6Shaft: 1/2in.Inlet: 1in.Outlet: 1/2in. NPTMinimum 6 HP or larger gas engine, direct drive onlyFor use with open center hydraulic systems1st Stage: 13.6 GPM@650 PSI2nd Stage: 2.9 GPM@2500 PSIMaximum Pressure: 3000 PSIBolt Circle: 2.83in.4 holes spaced 2in. on centerHole Diameter: .344in.Shaft Size: 1/2in. x 1 1/2in.Woodruff Key: 1/8in.Rotation: Clockwise"
click for details... |
|
 |
Haldex "Haldex Hydraulic Pump — 16 GPM, 2-Stage, Model# 1001507"
"The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A.GPM: 16Shaft: 1/2in.Inlet: 1in. Outlet: 1/2in. NPTFDimensions:7 1/4in. L with shaft5 5/8in. L without shaft3in. H across body3 3/8in. across mounting surfaceMinimum 8 HP or larger gas engine, direct drive only, horizontal shaftFor use with open center hydraulic systems onlyFirst Stage: 16 GPM @ 650 PSISecond Stage: 3.5 GPM @ 2500 PSIMaximum pressure: 3000 PSIBolt circle: 2.83in.4 holes spaced 2in. on centerHole diameter: .344in.Woodruff key: 1/8in.Rotation: Clockwise"
click for details... |
|
 |
Haldex "Haldex Hydraulic Pump — 22 GPM, 2-Stage, Model# 1080035"
The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A.GPM: 22Shaft: 5/8in.Inlet: 1 1/4in.Outlet: 1in. NPT
click for details... |
|
 |
Hydra-Buddy "Hydra-Buddy Portable Hydraulic Power — 420 GPH, 5 HP, 1/2in., Model# HBH-02"
"Designed for tough applications around the farm or in the field, this portable hydraulic power replaces tractor power for dump wagons, conveyors, augers, lifts and more. Includes a 5.6-gallon hydraulic tank, 1/2in. male and 1/2in. female quick-connect hydraulic couplers and durable powder-coat finish. Saves fuel and lowers tractor hours and maintenance costs. Hydraulic lines have 3000-lb. burst capacity. Optional wheel kit Item# 24501 sold separately. 1-year limited warranty. Truck ship. U.S.A. Factory shipped.5 HP Honda GC engine7 GPM Barnes pump900 PSI system outpur"
click for details... |
|
 |
Hydra-Buddy "Hydra-Buddy XL Portable Hydraulic Power Pack — 420 GPH, 8 HP, 1/2in., Model# HBHXL-05"
"Designed for tough applications around the farm or in the field, this portable hydraulic power unit replaces tractor power for large hydraulic implements, conveyors and grain augers. Also positions farm implements for repair and maintenance. 8 HP Briggs & Stratton I/C engine with 7 GPM Barnes pump delivers 1450 PSI system output. Includes a 10-gallon hydraulic tank, 1/2in. male and 1/2in. female quick-connect hydraulic couplers and durable powder-coat finish. Saves fuel and lowers tractor hours and maintenance costs. Hydraulic lines have 3000-lb. burst capacity. Optional wheel kit Item# 24501 sold separately. Truck ship. U.S.A.8 HP Briggs & Stratton I/C engine7 GPM Barnes pump1450 PSI system output"
click for details... |
|
 |
Lion 2500 "Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder — 2in. Bore, 10in. Stroke, Model# 20TL10-112"
"Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. 30-month limited warranty.2500 PSI2in. bore10in. stroke20 1/4in. closed pin center distance1 1/8in. shaft30-month limited warrantyModel# 20TL10-112"
click for details... |
|
 |
Lion 2500 "Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder — 2in. Bore, 12in. Stroke, Model# 20TL12-112"
"Built tough for agricultural and industrial applications. 2500 PSI model is designed to withstand shock loads of up to 5000 PSI. Durable ductile iron cast components. 90 durometer O-ring seals with antiextrusion rings for positive sealing throughout the cylinder. High tensile steel shaft is precision ground, polished and hard chrome-plated. 30-month limited warranty.2500 PSI2in. bore12in. stroke22 1/4in. closed pin center distance1 1/8in. shaft30-month limited warrantyModel# 20TL12-112"
click for details... |
| |
